云質保溫裝飾一體板施工工藝：

ConstructionTechnology

粘貼：金屬保溫裝飾一體板為輕型材料，自重僅為8-12公斤/平方，比現場作業的抹灰系統的整體重量還小，因此只需用粘結劑把TS金屬飾面保溫裝飾一體化板直接粘貼到墻面即可達到規定的粘結強度要求。

錨固：為了清理一樣化一體化板分層剝離的現象，提高一體化板的整體性能。

金屬飾面保溫裝飾一體化板專門研制了錨固件，在粘結的基礎上，再次將一體化板與墻體牢固的連接在一起為高層建筑的外立。

接縫處理：現場安裝金屬飾面保溫裝飾一體化板時，在兩塊板之間預留10-15mm寬的接縫，待底部的粘結劑干燥后在接縫中嵌填泡沫棒，兩側貼美紋紙，再用耐候型硅膠填平整條接縫，刮平后掀下美紋紙即可。

■Stick:Themetalthermalinsulationanddecorationintegratedpanelisalightmaterial withaweightofonly8-12kg/m,whichislighterthantheoverallweightoftheplastering systemonsite,Therefore,itisonlyneedtouseaspecialadhesivetosticktheTSthermal insulationanddecorationintegratedmetalpanelonthewall,thenitcanmeetthe bondingstrengthrequirementsofthestate.

■Anchor:Inordertoeliminatethephenomenonofdelaminationoftheintegratedpanelcompletely,improvetheoverallsafety,wehavedevelopedauniqueanchor,onthe bytheanchor,whichprovidesaperfectguaranteefortheexternalfacadeofthe high-risebuilding.

■Seamtreatment;Wheninstallingtheinsulationanddecorationintegratedmetalpanelon site,reserveaseamof10-15mmwidthbetweenthetwopanels.Aftertheadhesiveatthe bottomisdry,insertafoamrodintheseam.Placemaskingpaperontheside,thenfillthe entireseamwithweather-resistantsilicone,andscrapeoffthemaskingpaperafter smoothing.